Overhaul

Rear Seat Cushion Disassembly/Reassembly

Special Tools Required

- KTC trim tool set SOJATP2014*

NOTE:

- Put on gloves to protect your hands.

- Take care not to tear the seams or damage the seat covers.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the bolts, then separate the rear seat-back (A) and the rear seat cushion (B).






2. Remove the bolts (A, B), then separate the left seat-back (C) and the right seat-back (D).






3. Remove the screw. Release the tabs (A) and the hooks (B), then remove the recline outer cover (C).

NOTE: The left seat cushion is shown; the right seat cushion is similar.






4. Remove the screw, then remove the recline inner cover (A).






5. Pull back the rear seat cushion under-cover trim (A) to release the hooks (B, C) then remove it.

Left seat cushion





Right seat cushion





6. Remove the rear seat cushion under-cover (A).
-1 Remove the caps (B) with the appropriate trim tool.
-2 Remove the screws (C, D).
-3 Release the hook strips (E) of the seat cushion cover from the under-cover.

7. Remove the rear seat cushion handle. Rear Seat Cushion Handle Replacement

Left seat cushion





Right seat cushion





8. Release the hooks (A) securing the seat cushion cover.






9. Separate the seat cushion frame (A) and the seat cushion cover/pad (B).

10. Assemble the seat cushion in the reverse order of disassembly, and note these items:
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.

- Push each cover hooks and tabs into place securely.