Front Seat Linkage Disassembly/Reassembly - Passengers Manual

Front Seat Linkage Disassembly/Reassembly - Passenger's Manual

- The front ODS unit must be calibrated after any of these actions. Programming and Relearning
- Front passenger's seat replacement (including any seat components)

- Replacement of the seat weight sensors

- Replacement of the ODS unit

NOTE:

- Put on gloves to protect your hands.

- To remove the slide lever, slide the front seat forward fully, then lightly tap the lever out to disconnect both ends of it from the springs in both seat tracks.

- Apply oil to the pivot portions of the slide lock.

- Apply multipurpose grease to the sliding parts and pivot portions of the seat tracks.

- When tightening the weight sensor mounting TORX bolts, tighten the bolts in the sequence shown.