Traction Control Switch: Testing and Inspection

VSA OFF Switch Test

1. Remove the VSA OFF switch (A) from the switch panel.

2. Disconnect the VSA OFF switch 10P connector.






3. Check for continuity between the VSA OFF switch 10P connector terminals No. 2 and No. 3. There should be continuity when the switch is pushed and no continuity when the switch is released.






4. Check for continuity between the VSA OFF switch 10P connector terminals No. 5 and No. 6. There should be continuity at all times.

5. Install the VSA OFF switch in the reverse order of removal.