Fog Light Switch Test/Replacement (RTL and EXL models)

Fog Light Switch Test/Replacement

RTL and EXL models

1. Remove the dashboard lower cover. Drivers Dashboard Lower Cover Removal/Installation

2. Disconnect the 5P connector (A) from the fog light switch (B).

3. Check for continuity between terminal No. 2 and No. 1.
- There should be continuity when the switch is pushed.

- There should be no continuity when the switch is released.

- Have the driver or someone who weighs the same sit in the driver's seat.

4. If the continuity is not as specified, replace the switch.

5. Install the switch in the reverse order of removal.