A/T Park Pin Switch Test

A/T Park Pin Switch Test

1. Remove the driver's dashboard lower cover. Drivers Dashboard Lower Cover Removal/Installation

2. Remove the steering column covers. Steering Column Removal and Installation

3. Disconnect the D3 switch/shift lock solenoid/park pin switch connector.

4. Move the shift lever into P, then check for continuity between D3 switch/shift lock solenoid/park pin switch connector terminals No. 1 and No. 2. There should be no continuity.

5. Move the shift lever out of P, and check for continuity between terminals No. 1 and No. 2. There should be continuity.

6. If the park pin switch is faulty, replace it. Service and Repair

7. Install the shift lever assembly. A/T Shift Lever Installation