Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2009 >> Ridgeline V6-3.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Impact Sensor >> Service and Repair >> Side Impact Sensor (First) Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Side Impact Sensor (First) Replacement




Side Impact Sensor (First) Replacement

Removal

1. Do the battery terminal disconnection procedure, Procedures then wait at least 3 minutes before starting work.

2. Remove the seat assembly. Front Seat Removal/Installation

3. Remove the front door sill trim Service and Repair and the B-pillar lower trim. Interior Trim Removal/Installation - Pillar Areas

4. Disconnect the floor wire harness 2P connector from the side impact sensor (first).

5. Using a TORX T30 bit, remove the TORX bolt (A), then remove the side impact sensor (first) (B).






Installation

1. Install the side impact sensor (first) (A) with the TORX bolt (B), then connect the floor wire harness 2P connector (C) to the side impact sensor (first).

2. Do the battery terminal reconnection procedure. Procedures

3. Clear the any DTCs. Initial Inspection and Diagnostic Overview

4. Install all removed parts.

5. After installing the side impact sensor (first), confirm proper system operation: Turn the ignition switch to ON (II); the SRS indicator should come on for about 6 seconds and then go off.





pro multis · About Operation CHARM