Ignition Switch: Service and Repair

Ignition Switch Replacement

SRS components are located in the area. Review the SRS component locations, Locations and precautions and procedures Technician Safety Information before performing repairs or servicing.

1. Do the battery terminal disconnection procedure. Procedures

2. Remove the left front door sill trim and left kick panel. Service and Repair

3. Disconnect the 6P connector (A) from the under-dash fuse/relay box.

4. Remove the two screws and the ignition switch (B).

5. Install the reverse order of removal.

6. Do the battery terminal reconnection procedure. Procedures

7. Confirm that all system work properly.

8. Do the power window control unit reset procedure. Testing and Inspection