Harmonic Balancer - Crankshaft Pulley

Crankshaft Pulley Torque

Tighten the bolt. Do not use an impact wrench.






Hold the pulley with the holder handle (A) and the holder attachment (B). Tighten the bolt to 64 N-m (6.5 kgf-m, 47 lbf-ft) with a torque wrench and a 19 mm socket (C).






Mark the bolt head (D) and the crankshaft pulley (E) as shown, then tighten the bolt an additional 60 ° (The mark on the bolt head lines up with the mark on the crankshaft pulley).