Torque Converter Housing Intermediary Shaft Bearing Replacement

Torque Converter Housing Intermediary Shaft Bearing Replacement

Special Tools Required

- Adjustable bearing puller, 25-40 mm 07JAC-PH80000
- Weight, remover 07741-0010201
- Driver handle 15 x 135L 07749-0010000
- Attachment, 52 x 55 mm 07746-0010400
1. Remove the intermediary shaft bearing from the torque converter housing with the adjustable bearing puller (25-40 mm), and the weight, remover.






2. Install the ATF guide plate (A), then install a new bearing (B) in the housing.






3. Drive the bearing into the housing with the driver handle and the attachment (52 x 55 mm).