Torque Converter Housing Park Lever Shaft Bearing Replacement

Torque Converter Housing Park Lever Shaft Bearing Replacement

Special Tools Required

- Bearing remover shaft set, 12 mm 07936-1660101
- Weight, remover 07741-0010201
- Driver handle 15 x 135L 07749-0010000
- Attachment, 22 x 24 mm 07746-0010800
1. Remove the park lever shaft bearing from the torque converter housing with the bearing remover shaft set (12 mm), and the weight remover.






2. Install a new bearing until it bottoms in the housing with the driver handle and the attachment (22 x 24 mm).