Rear Differential Installation

Rear Differential Installation

1. Raise the rear differential a little on the transmission jack, then connect the breather tube (A) to the rear differential, then install a new set rings (B).






2. Raise the rear differential to the mounting level, then install new mounting bolts (A) and washer (B).

3. Connect the 6P (C) and 2P (D) connectors.

4. Install the rear driveshaft. Rear Driveshaft Installation






5. Install the new rear differential (A) onto the propeller shaft (B), by aligning the reference mark (C). Make sure you use new mounting bolts.

6. Attach the propeller shaft to the transfer and the rear differential by aligning the reference marks. Propeller Shaft Installation

7. Refill the differential with recommended fluid. Rear Differential Fluid Inspection and Replacement