Front Bulkhead Cover Replacement

Front Bulkhead Cover Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the front bumper or the body.

1. Remove the clips (A, B), then carefully pulling up the front bulkhead cover (C), and remove the cover by releasing the front edge of the cover from the grille (D).

NOTE: To release the clips, pry up on the center pin at the notch (E).





2. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.