Traction Control Switch: Testing and Inspection

VSA Off Switch Test/Replacement

1. Turn the ignition switch to LOCK (0).

2. Remove the power mirror switch (A) Service and Repair, then disconnect the VSA OFF switch 5P connector (B).





3. Push out the VSA OFF switch (C) from the back of the switch panel.

4. Check for continuity between the VSA OFF switch 5P connector terminal in each button position according to the table.






'07-09 models





'10-11 models





5. Check for continuity between the VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.





6. Install the VSA OFF switch in the reverse order of removal.