Park Pin Switch Test

Park Pin Switch Test

1. Remove the shift lever. A/T Shift Lever Removal.

2. Disconnect A/T gear position indicator panel light/D3 switch/park pin switch 6P connector (A) from the park pin switch (B).





3. Check for continuity between connector terminal No. 1 and No. 2.

There should be continuity.

- There should be continuity when the shift lever is moved out of P.

- There should be no continuity when the shift lever is moved lever to P.

4. If the continuity is not as specified, replace the park pin switch Service and Repair.