Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)

Instrument Panel Removal/Installation

Instrument Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:

- Subdisplay visor Dashboard Subdisplay Visor Removal/Installation
- Audio-navigation unit, with navigation system:
- '09-10 models Audio-Navigation Unit Removal/Installation
- Audio unit, without navigation system:
- '09-10 models Audio Unit Removal/Installation

2. Remove the screws.

3. Detach the clips along the lower edge of the instrument panel (A).

4. Detach the clips along the upper edge of the instrument panel (A). Gently pull out the instrument panel to release the hooks (B) from the holder (C) of the gauge control module.

5. Install the instrument panel in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.