Noise From Transmission In N and P

Noise from transmission in N and P

Intermediate housing assembly worn or damaged

Input shaft worn or damaged

Planetary carrier worn or damaged

Input shaft needle bearing seized, worn, or damaged

Thrust needle bearing on planetary carrier seized, worn, or damaged

Thrust washer on planetary carrier seized, worn, or damaged

CVTF pump worn, binding, or foreign material in CVTF pump

CVTF pump chain or CVTF pump sprocket worn or damaged

Flywheel assembly defective

Notes

Check the needle bearing and the thrust washers on the planetary carrier for wear and damage. If the needle bearing or thrust washer is worn or damaged, replace the bearing or washer, and adjust the clearance with the thrust shim.