CVT Forward Clutch Disassembly

CVT Forward Clutch Disassembly

Special Tools Required

- Clutch Spring Compressor Set 07LAE-PX40000

1. Remove the snap ring (A), then remove the clutch end-plate, the clutch discs, and the plates using a screwdriver (B).






2. Remove the wave spring.






3. Install the clutch spring compressor on the clutch assembly.






4. Be sure the clutch spring compressor (A) is adjusted to make full contact with the spring retainer (B) on the clutch.






5. Check the placement of the clutch spring compressor. If either end of the clutch spring compressor is set over an area of the spring retainer which is unsupported by the return spring, the retainer may be damaged.






6. Compress the spring until the snap ring can be removed.






7. Remove the snap ring (A). Then remove the clutch spring compressor (B), the spring retainer (C), and the return spring.






8. Wrap a shop rag around the clutch drum (A), and apply air pressure to the fluid passage to remove the piston (B). Place a finger tip on the other end while applying air pressure.