Flywheel Housing Final Drive Shaft Bearing Replacement

Flywheel Housing Final Drive Shaft Bearing Replacement

Special Tools Required

- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Bearing Driver Attachment, 62 x 68 mm 07746-0010500
- Driver Handle, 15 x 135L 07749-0010000

1. Remove the final drive shaft bearing (A) using the 25-40 mm adjustable bearing puller and a commercially available 3/8 "-16 UNF slide hammer (B).






2. Install a new bearing into the flywheel housing using the driver handle and the 62 x 68 mm attachment.