Stall Speed Low

Stall speed low

PCM defective

Transmission range switch defective or out of adjustment

Intermediate housing assembly worn or damaged

Pulley pressure feed pipe damaged or out of round

Start clutch defective

Valve body assembly defective

CVT driven pulley pressure control solenoid valve defective

CVT drive pulley pressure control solenoid valve defective

CVT clutch pressure control solenoid valve defective

CVT input shaft (drive pulley) and output shaft (driven pulley) speed sensors defective

Engine output low

IMA motor defective

Notes

Check the drive and driven pulley pressure, and the lubrication pressure CVT Pressure Test. If the pressure is low or there is no pressure, check the CVTF pump, the CVTF pump chain, and the CVTF pump sprocket.