Tightening Torque and Sequence

Tighten the cylinder head bolts in sequence to 29 Nm (3.0 kg-m, 22 lb-ft). Using a beam-type torque wrench. When using a preset-type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it from the first step.






Tighten all cylinder head bolts an additional 130 °.






Intake Manifold Intake Manifold Removal/Installation

Camshaft Bearing Cap Rocker Arm Assembly Installation

Camshaft Pulley/Gear Camshaft Sprocket Installation