Steering Angle Sensor: Service and Repair

Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.

1. Make sure the ignition switch is in LOCK (0).

2. With the wheels in the straight-ahead position and the steering wheel centered, remove the steering wheel Steering Wheel Removal, and steering column cover.

3. Remove the cable reel and the combination switch assembly.

4. Remove the combination switch (A).





5. Replace the combination switch body assembly (B).

6. Install the combination switch in the reverse order of removal.

NOTE:

- Do not remove the steering angle sensor from the combination switch body.
- When installing the cable reel, set the turn signal canceling sleeve position.

7. Do the steering angle sensor center point writing Testing and Inspection.