Drivers Dashboard Lower Cover Removal and Installation

Driver's Dashboard Lower Cover Removal and Installation

Removal

1. Driver's Dashboard Undercover





1. Turn the lock knob (A) 90 °, then gently pull down the front edge of the driver's dashboard undercover (B) to detach the clip (C).

2. Pull away the undercover to release the pin (D) from the holder (E), then remove the driver's dashboard undercover.

2. Driver's Dashboard Panel Assembly





1. Carefully pry out the driver's dashboard panel assembly (A) with the appropriate trim tool to detach the clips (B).

2. Disconnect the connector (C), then remove the driver's dashboard panel assembly.

3. Driver's Dashboard Lower Cover





1. Carefully pry out the driver's dashboard lower cover (A) with the appropriate trim tool to detach the clips (B).

2. Disconnect the connector (C), then remove the driver's dashboard lower cover.

Installation

1. Driver's Dashboard Lower Cover





1. Connect the connector (A), then install the driver's dashboard lower cover (B). Make sure the clips (C) snap into place securely.

2. Driver's Dashboard Panel Assembly





1. Connect the connector (A), then install the driver's dashboard panel assembly (B). Make sure the clips (C) snap into place securely.

3. Driver's Dashboard Undercover





1. Install the driver's dashboard undercover (A). Make sure the clip (B) snap into place securely, and the pin (C) into the holder (D) securely.

2. Turn the lock knob (E) 90 °.