Installation
Seat Heater Removal and Installation - Seat-Back Heater
Installation
NOTE: Steps 1-9 show installing the passenger's side, steps 10-19 show installing the driver's side.
1. Seat-Back Heater - Passenger's Side
1. Install the seat-back heater (A).
2. Front Seat-Back Cover - Passenger's Side
NOTE: Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).
Leather Seat
Fabric Seat
1. Install the seat-back cover (A) with the upholstery rings (B).
2. Loop the airbag attachment wire A through the inside reinforcing cloth (C).
3. Loop the airbag attachment wire B through the inside reinforcing cloth (D).
3. Front Seat-Back Cover/Pad - Passenger's Side
1. Install the seat-back cover/pad (A) on the seat-back frame (B).
4. Head Restraint Guide - Passenger's Side
1. Install the head restraint guides (A).
5. Front Seat-Back - Passenger's Side
1. Install the hook strips (A) to the seat-back frame (B).
2. Install the harness clips (C).
3. Connect the connectors (A) and harness clips (B) to the ODS unit (USA and Canada models) or OPDS unit (Mexico models) (C).
4. Insert the hooks (A), and install the cover (B) and the screw (C) and harness clip (D).
5. Install the airbag attachment wires A, B to the seat-back frame (C).
6. Install the harness clips (A).
7. Install the harness (B) through the holes (C) in the seat-back cover (D).
8. Install the hook strips (A) to the seat-back frame.
9. Zip the seat-back cover (A).
10. Install the hook strip (B).
With Seat Heater
Without Seat Heater
11. Install the connector clips (A).
12. Install the harness clips (B).
13. Install the harness holders (C) to the seat cushion frame springs (D).
14. Connect the connector (E).
15. Install the elastic strap (A) to the seat cushion frame springs (B).
6. Front Seat Armrest - Passenger's Side
1. Install the pins (A) to the seat-back.
2. Install the armrest (A), then install the washer (B), the bushing (C), and the center pin (D).
3. Install the cap (E) to the armrest.
7. Front Seat Assembly - Passenger's Side
Without Woofer
With Woofer
1. Connect the connectors (A).
2. Install the harness clip (B).
Front Side
Rear Side
3. Install the seat mounting bolts (A).
NOTE:
* Tighten the bolts by hand first, then tighten them to the specified torque.
* Tighten the seat mounting bolts to the specified torque in the sequence shown. Slide the seat all the way back and tighten bolts 1 and 2, then slide it forward and tighten bolts 3 and 4.
4. Install rear inner seat track end cover (A) and rear outer seat track end cover (B). Make sure the hooks (C) snap into place securely.
8. Head Restraint - Passenger's Side
1. Insert the head restraint (A) into the seat-back as shown.
9. Front Seat Belt Lower Anchor Bolt - Passenger's Side
1. Install the lower anchor bolt (A).
2. Install the anchor cover (A). Make sure the hooks (B) and the tab (C) snap into place securely.
10. Seat-Back Heater - Driver's Side
1. Install the seat-back heater (A).
11. Front Seat-Back Cover - Driver's Side
NOTE: Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available upholstery ring pliers (D).
Leather Seat
Fabric Seat
1. Install the seat-back cover (A) with the upholstery rings (B).
2. Loop the airbag attachment wire A through the inside reinforcing cloth (C).
3. Loop the airbag attachment wire B through the inside reinforcing cloth (D).
12. Front Seat-Back Cover/Pad - Driver's Side
1. Install the seat-back cover/pad (A) on the seat-back frame (B).
13. Head Restraint Guides - Driver's Side
1. Install the head restraint guides (A).
14. Front Seat-Back - Driver's Side
1. Install the hook strips (A) to the seat-back frame (B).
2. Install the airbag attachment wires A, B to the seat-back frame (C).
3. Install the harness clip (A).
4. Install the harness (B) through the holes (C).
5. Install the hook strips (A) to the seat frame.
6. Zip the seat-back cover (A).
7. Install the hook strip (B).
Power Seat
Manual Seat with Seat Heater
8. Install the connector clips (A).
9. Install the harness clips (B).
10. Install the harness holders (C) to the seat cushion frame springs (D).
11. Connect the connector (E).
12. Install the elastic strap (A) to the seat cushion frame springs (B).
15. Front Seat Armrest
1. Install the pins (A) to the seat-back.
2. Install the armrest (A), then install the washer (B), the bushing (C), and the center pin (D).
3. Install the cap (E) to the armrest.
16. Front Seat - Driver's Side
1. Connect the connectors (A).
2. Install the harness clip (B).
Front Side
Rear Side
3. Install the seat mounting bolts (A).
NOTE:
* Tighten the bolts by hand first, then tighten them to the specified torque.
* Tighten the seat mounting bolts to the specified torque in the sequence shown. Slide the seat all the way back and tighten bolts 1 and 2, then slide it forward and tighten bolts 3 and 4.
4. Install rear inner seat track end cover (A) and rear outer seat track end cover (B). Make sure the hooks (C) snap into place securely.
17. Head Restraint - Driver's Side
1. Insert the head restraint (A) to the seat-back as shown.
18. Battery Terminal (SRS) - Reconnection
NOTE: If the battery performance is abnormal, test the battery.
1. Clean the battery terminals.
2. Connect the positive cable (A) to the battery.
NOTE: Always connect the positive side first.
3. Connect the negative cable (B) to the battery.
4. Apply multipurpose grease to the terminals to prevent corrosion.
19. Front Seat Belt Lower Anchor Bolt
1. Install the lower anchor bolt.
NOTE: Before installing the anchor bolt, make sure there are no twists or kinks in the seat belt.
2. Install the anchor cover (A). Make sure the hooks (B) and the tab (C) snap into place securely.