Rear Seat Armrest Beverage Holder Removal and Installation

Rear Seat Armrest Beverage Holder Removal and Installation

Removal

1. Rear Seat Armrest Beverage Holder





1. Push on the bottom ribs (A) of the left side hooks (B) with the appropriate trim tool to pull up the armrest beverage holder (C), then release the hooks from the wire (D).





2. Release the right side hooks (A) of the rear seat armrest beverage holder (B) from the wire (C), then remove the beverage holder.

Installation

1. Rear Seat Armrest Beverage Holder





1. Install the right side hooks (A) of the rear seat armrest beverage holder (B) to the wire (C).

NOTE: Make sure the right side hooks are installed securely to the wire.





2. Push down on the beverage holder (A), and install the left side hooks (B) into the wire (C).