Rear Seat Cushion Disassembly And Reassembly
Rear Seat Cushion Disassembly and Reassembly
Disassembly
1. Rear Seat Cushion Foot Cover - Both Sides
Left side
Right side
1. Pull up the rear seat cushion foot covers (A) by hand to detach the clips (B).
2. Detach the hooks (C), then remove the rear seat cushion foot covers.
2. Left Rear Seat Cushion Assembly
1. Detach the cables (A) from the cable brackets (B), and detach the cable clip (C), then disconnect the cables from the seat cushion assembly (D).
2. Remove the bolts (A) securing the left rear seat cushion assembly (B), then remove the left rear seat cushion assembly.
3. Right Rear Seat Cushion Assembly
1. Detach the cables (A) from the cable brackets (B), and detach the cable clip (C), then disconnect the cables from the seat cushion assembly (D).
2. Remove the bolts (A) securing the right rear seat cushion assembly (B), then remove the right rear seat cushion assembly.
4. Upper Inner Seat Cushion Cover
1. Detach the hooks (A), then remove the upper inner seat cushion cover (B) from the rear seat cushion (C).
5. Upper Outer Seat Cushion Cover
1. Detach the hooks (A), then remove the upper outer seat cushion cover (B) from the rear seat cushion (C).
6. Rear Seat Cushion Foot Assembly
1. Remove the nuts (A), then remove the rear seat cushion foot assembly (B).
7. Rear Seat Cushion Foot
Left Side
Right Side
1. Remove the screws, then remove the covers (A).
2. Remove the screws (A), then remove the rear seat cushion foot damper (B).
3. Disconnect the rear seat cushion control cable (C) from the rear seat cushion strap (D).
4. Remove the rear seat cushion strap guide (E) and the rear seat cushion strap.
5. Detach the rear seat cushion control cable (A) from the cable bracket (B), then remove the cable clips (C).
6. Remove the rear seat cushion control cable from the rear seat cushion latch (D).
7. Remove the bolts (E), then remove the rear seat cushion latch from the rear seat cushion foot assembly (F).
8. Rear Seat Cushion Under Cover
Left Side
Right Side
1. Pull back the edge of the rear seat cushion cover (A) all the way around.
2. Remove the rear seat cushion under cover (A) from the rear seat cushion cover/pad (B).
3. Remove the screws (A), then rear seat cushion under-trim cover (B) and the rear seat cushion member frame (C) from the rear seat cushion under cover (D).
Reassembly
1. Rear Seat Cushion Under Cover
1. Install the rear seat cushion under-trim cover (A) and the rear seat cushion member frame (B) to the rear seat cushion under cover (C).
2. Install the rear seat cushion under cover (A) to the rear seat cushion cover/pad (B).
3. Install the edge of the rear seat cushion cover (A) all the way around.
2. Rear Seat Cushion Foot
1. Install the bolts (A) securing rear seat cushion latch (B).
2. Connect the rear seat cushion control cable (C) to the rear seat cushion latch.
3. Connect the rear seat cushion control cable to the cable bracket (D).
4. Install the cable clip (E).
5. Install the rear seat cushion strap (A) and the rear seat cushion strap guide (B).
6. Install the rear seat cushion control cable (C) to the rear seat cushion strap.
7. Install the rear seat cushion foot damper (D).
8. Install the covers (A).
3. Rear Seat Cushion Foot Assembly
1. Install the nuts (A) securing the rear seat cushion foot assembly (B).
4. Upper Outer Seat Cushion Cover
1. Install the upper outer seat cushion cover (A) to the rear seat cushion (B). Make sure the hooks (C) snap into place securely.
5. Upper Inner Seat Cushion Cover
1. Install the upper inner seat cushion cover (A) to the rear seat cushion (B). Make sure the hooks (C) snap into place securely.
6. Right Rear Seat Cushion Assembly
1. Install the right rear seat cushion assembly (A).
NOTE: Tighten the bolts (B) by hand first, then tighten them to the specified torque.
2. Connect the cables (A) to the rear seat cushion assembly (B), then install the cables to the cable brackets (C), and install the cable clip (D).
7. Left Rear Seat Cushion Assembly
1. Install the left rear seat cushion assembly (A).
NOTE: Tighten the bolts (B) by hand first, then tighten them to the specified torque.
2. Connect the cables (A) to the rear seat cushion assembly (B), then install the cables to the cable brackets (C), and install the cable clip (D).
8. Rear Seat Cushion Foot Cover - Both Sides
Left side
Right side
1. Install the rear seat cushion foot covers (A). Make sure the clips (B) and the hooks (C) snap into place securely.