Part Two

Rear Seat-Back Frame Removal and Installation

Installation

NOTE: Steps 1-5 show installing the right side, steps 6-11 show installing the left side.

11. Rear Seat Head Restraint - Left Side





Left Rear Head Restraint

1. Inspect the knob (A) if it has any of the following damage:

* Any cracks or deformation at the tab (B) of the knob.

* Any cracks or stress-whitening at the tab (B) of the knob.





2. Insert the knob (A) to the head restraint (B) as shown.

3. Install the head restraint.

NOTE: Make sure the head restraint is locked securely. If not, replace the head restraint.





Center Rear Head Restraint

1. Install the center rear head restraint (A).

12. Rear Seat-Back

Left Side





Right Side





1. Left Side: Install the mounting bolts (A), then install the rear seat-back (B).

2. Right Side: Install the mounting bolts (A) and anchor bolt (B), then install the rear seat-back (C).

3. Install the rear seat-back cover (D). The clips (E) snap into place securely.





4. Connect the rear seat-back arrange control cable (A) to the rear seat cushion foot (B).

5. Install the rear seat-back arrange control cable to the cable bracket (C).

6. Install the cable clip (D).

NOTE:
* Make sure the cables are connected securely.

* Make sure the rear seat cushion latches and unlatches properly.

13. Rear Seat Foot Cover

Left Side





Right Side





1. Install the rear seat cushion foot cover (A). Make sure the clips (B) and the hooks (C) snap into place securely.

14. Rear Damper Maintenance Cover





1. Fold down the rear seat-back.

2. Install the rear damper maintenance cover (A). Make sure the hooks (B) snap into place securely.

15. Cargo Floor Cover





1. Install the cargo floor cover (A).

16. Tonneau Cover (For Some Models)





1. Install the tonneau cover (A).