Rear Wheel Speed Sensor Removal And Installation

Rear Wheel Speed Sensor Removal and Installation

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Rear Wheel





1. Remove the rear wheel.

3. Rear Wheel Speed Sensor

1. Turn the ignition switch to LOCK (0).

2. Release the connector holding clamps (A).






3. Disconnect the connector (B).

4. Remove the clips (C).

5. Remove the wheel speed sensor (D).

Installation

1. Rear Wheel Speed Sensor

1. Install the wheel speed sensor (A).

NOTE:
* Do not twist the sensor wires.

* If the wheel speed sensor comes in contact with the wheel bearing, it is faulty.

* Make sure there is no debris in the sensor mounting hole.






2. Install the harness clips (B).

3. Connect the connector (C).

4. Connect the connector holding clamps (D).

2. Rear Wheel





1. Install the rear wheel.

NOTE: Before installing the wheel, clean the mating surfaces between the brake disc/drum and the inside of the wheel.