Cabin Temperature Sensor / Switch: Service and Repair

Humidity/In-Car Temperature Sensor Removal and Installation

Removal

1. Center Maintenance Cover





1. Remove the maintenance cover (A).

2. Shift Lever Panel (AT)





1. Carefully pry out the shift lever panel (A) with the appropriate trim tool to detach the clips (B, C) and the hooks (D), then remove the shift lever panel.

3. TPMS Control Unit - Move





1. Press the tab (A), and remove the TPMS control unit (B) with connector connected.

4. Humidity/In-Car Temperature Sensor





1. Push out the humidity/in-car temperature sensor (A) by press the tab (B) from back.

2. Disconnect the aspirator hose (C) and the connector (D).

Installation

1. Humidity/In-Car Temperature Sensor





1. Connect the aspirator hose (A) and the connector (B).

2. Install the humidity/in-car temperature sensor (C).

2. TPMS Control Unit - Move





1. Install the TPMS control unit (A) with connector connected.

3. Shift Lever Panel (AT)





1. Install the shift lever panel (A). Make sure the clips (B, C) and the hooks (D) snap into place securely.

4. Center Maintenance Cover





1. Install the maintenance cover (A).