Fog/Driving Lamp Bulb: Service and Repair

Exterior Lights Bulb Removal and Installation - Fog Light

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Front Splash Shield As Needed





1. Remove the bolts (A), then remove the clips (B) that secure the front inner fender and the front splash shield (C) to the body.

2. From under the front bumper (D), remove the clips (E).

3. From under the body, remove the clips (F), then pull out the front splash shield.

3. Fog Light Bulb





1. Disconnect the connector.

2. Turn the bulb (A) 45 °counterclockwise to remove it from the housing.

Installation

1. Fog Light Bulb





1. Turn the bulb (A) 45 ° clockwise to install it to the housing.

2. Connect the connectors.

2. Front Splash Shield (2.4L) As Needed





1. Install the front splash shield (A), then install the bolts (B) and the clips (C, D). Make sure the clips snap into place securely.