Ambient Light Removal, Installation, And Test

Ambient Light Removal, Installation, and Test

Removal

NOTE: Step 1 shows removing the vehicle without moonroof, step 2 shows removing the vehicle with moonroof.

1. Front Individual Map Light (without moonroof)

1. Turn the front individual map light switch OFF.

2. Carefully pry off the lenses (A) with a flat-tip screwdriver.

3. Remove the bulbs.

4. Remove the front individual map light (B).

5. Disconnect the connectors.

2. Front Individual Map Light (with moonroof)

1. Remove the interior light switch (A) from the individual map light (B).

2. Connect battery power to terminal No.7 and ground to terminal No. 6. The ambient light should come on.

3. If the ambient light does not come on, the ambient light is faulty; replace the interior light switch (A).

2. Ambient Light - Test (with moonroof)

1. Remove the moonroof switch (A) from the individual map light (B).

2. Connect battery power to terminal No.4 and ground to terminal No. 6. The ambient light should come on.

3. If the ambient light does not come on, the ambient light is faulty; replace the moonroof switch (A).

Installation

NOTE: Step 1 shows installing the vehicle with moonroof, step 2 shows installing the vehicle without moonroof.

1. Front Individual Map Light (with moonroof)

1. Connect the connectors.

2. Install the front individual map lights (A).

3. Install the bulbs.

4. Carefully install the lenses (B).

2. Front Individual Map Light (without moonroof)

1. Connect the connectors.

2. Install the front individual map light (A).

3. Install the bulbs.

4. Carefully install the lenses (B).