Evaporative Emissions Hose: Service and Repair

Fuel Vapor Hose Removal and Installation

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Left Middle Floor Undercover





1. Remove the bolts (A) and clips (B, C), then remove the left middle floor undercover (D).

3. Fuel Vapor Hose





1. Push the tabs (A), and pull up the retainer (B), then disconnect the fuel vapor hose (C) from the fuel vent tube (D).





2. Remove the fuel vapor hose.

Installation

1. Fuel Vapor Hose





1. Connect the fuel vapor hose (A) to the fuel vent tube (B).

NOTE: Before connecting the fuel vapor hose, push down the retainer (C) of the fuel vent tube first, then connect the fuel vapor hose to the fuel vent tube.





2. Install the fuel vapor hose.
NOTE: The new fuel vapor hose has a ring pull (A) at the connector (B). When you connect the connector and confirm that the connection is secure, remove the ring pull by pulling it down.

2. Left Middle Floor Undercover





1. Install the left middle floor undercover (A), then install the bolts (B) and the clips (C, D). Make sure the clips snap into place securely.