Leak Detection Solenoid: Service and Repair

EVAP Canister Vent Shut Valve Removal and Installation

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Left Middle Floor Undercover





1. Remove the bolts (A) and clips (B, C), then remove the left middle floor undercover (D).

3. EVAP Canister Vent Shut Valve





1. Turn the EVAP canister vent shut valve (A) 45°counterclockwise, and pull it out.

Installation

1. EVAP Canister Vent Shut Valve





1. Align the positions (A), then install the EVAP canister vent shut valve (B) with new O-rings (C).

2. Left Middle Floor Undercover





1. Install the left middle floor undercover (A), then install the bolts (B) and the clips (C, D). Make sure the clips snap into place securely.