Front Stabilizer Link Removal And Installation

Front Stabilizer Link Removal and Installation

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Front Wheel





1. Remove the front wheel.

3. Front Stabilizer Link





1. Remove the flange nuts (A) while holding the respective joint pin (B) with a hex wrench (C).

2. Remove the stabilizer link (D).

Installation

1. Front Stabilizer Link





1. Install the stabilizer link (A).

NOTE: The stabilizer link has a paint mark (B).

2. Install the flange nuts (C), and tighten them to the specified torque while holding the respective joint pin (D) with a hex wrench (E).

2. Front Wheel





1. Install the front wheel.

NOTE: Before installing the wheel, clean the mating surfaces between the brake disc and the inside of the wheel.

3. Test Drive

1. Test-drive the vehicle.

4. Front Stabilizer Link - Tighten

1. After 5 minutes of driving, tighten the self-locking nut again to the specified torque value.