Input Shaft (Mainshaft) Speed Sensor Removal And Installation

Input Shaft (Mainshaft) Speed Sensor Removal and Installation

Removal

1. Air Cleaner Assembly





1. Disconnect the MAF sensor/IAT sensor connector (A).

2. Remove the harness clamp (B).

3. Disconnect the intake air duct (C) and the intake air pipe (D).

4. Remove the air cleaner (E).

2. Input Shaft (Mainshaft) Speed Sensor





1. Remove the input shaft (mainshaft) speed sensor (A).

2. Remove the O-ring (B) from the input shaft (mainshaft) speed sensor.

Installation

1. Input Shaft (Mainshaft) Speed Sensor





1. Install a new O-ring (A) on the input shaft (mainshaft) speed sensor (B).

2. Install the input shaft (mainshaft) speed sensor.

3. Check the connector (C) for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

2. Air Cleaner Assembly





1. Install the air cleaner (A).

2. Connect the intake air pipe (B) and the intake air duct (C).

3. Install the harness clamp (D).

4. Connect the MAF sensor/IAT sensor connector (E).