Manufacturer Code Charts: 2610

Control System DTCs

Navigation System DTC Troubleshooting: 2610

DTC 2610 : DRAM Diag

NOTE:
* Check the vehicle battery condition first Component Tests and General Diagnostics.
* This navigation DTC sets when a problem with the internal DRAM is detected (the ECU info icon is red in the System Links).
* Before you troubleshoot, make sure to follow the How to Troubleshoot the Navigation System Initial Inspection and Diagnostic Overview.
* Check any official Honda service website for more service information about the navigation system.

1. Problem verification:

-1. Clear the hard error codes Initial Inspection and Diagnostic Overview.

-2. Turn the ignition switch to LOCK (0) and then back to ON (II).

-3. Check for hard error codes Initial Inspection and Diagnostic Overview.

Is DTC 2610 indicated?
-YES- Replace the audio-navigation unit Audio-Navigation Unit Removal and Installation.
-NO- Intermittent failure, the system is OK at this time.