Manufacturer Code Charts: 41

Control System DTCs

DTC Troubleshooting: B1234 - (41)

DTC B1234 or DTC indicator 41 : A Short in the Air Mix Control Motor Circuit (Driver's)


1. Problem verification:

-1. Clear the DTC with the HDS.

-2. Turn the ignition switch to LOCK (0), and then back to ON (II).

-3. Do the Self-Diagnostic Function with the HDS or the climate control unit How to Troubleshoot the Climate Control System.

-4. Check for DTCs.





Is DTC B1234 or 41 indicated?
-YES- Go to step 2.
-NO- Intermittent failure. Check for loose wires or poor connections on the driver's air mix control motor circuit.

2. Shorted wire check (AMD P DR, SENSOR 5V lines):

-1. Turn the ignition switch to LOCK (0).

-2. Disconnect the following connectors.





-3. Check for continuity between test points 1 and 2 individually.














Is there continuity?
-YES- Repair a short to body ground in the wire(s) between the climate control unit and the driver's air mix control motor.
-NO- The AMD P DR and SENSOR 5V wires are OK. Go to step 3.

3. Driver's air mix control motor check:

-1. Test the driver's air mix control motor Drivers Air Mix Control Motor Test (Climate Control).

Is the driver's air mix control motor OK?
-YES- Replace the climate control unit Climate Control Unit Removal And Installation (Climate Control).
-NO- Replace the driver's air mix control motor Drivers Air Mix Control Motor Removal And Installation (Climate Control).