Transmission Fluid Pressure Switch A (2nd Clutch) Removal And Installation

Transmission Fluid Pressure Switch A (2nd Clutch) Removal and Installation

Removal

1. Air Cleaner Assembly





1. Disconnect the MAF sensor/IAT sensor connector (A).

2. Remove the harness clamp (B).

3. Disconnect the intake air duct (C) and the intake air pipe (D).

4. Remove the air cleaner (E).

2. Transmission Fluid Pressure Switch A (2nd Clutch)





1. Remove transmission fluid pressure switch A (2nd clutch) and the sealing washer (B).

Installation

1. Transmission Fluid Pressure Switch A (2nd Clutch)





1. Install transmission fluid pressure switch A (2nd clutch) using a new sealing washer (B) by turning the metal part, not the plastic part.

2. Check the connector (C) for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

2. Air Cleaner Assembly





1. Install the air cleaner (A).

2. Connect the intake air pipe (B) and the intake air duct (C).

3. Install the harness clamp (D).

4. Connect the MAF sensor/IAT sensor connector (E).