Front Passenger's Power Window Motor Test

Front Passenger's Power Window Motor Test

Motor Test

1. Remove the front passenger's power window switch Front Passengers Power Window Switch Removal And Installation.

2. Test the motor in each direction by connecting battery power and ground to the front passenger's power window switch 10P connector according to the table.









3. If the motor does not run or fails to run smoothly, go to step 4.

4. Remove the door panel Service and Repair.

5. Disconnect the 2P connector from the front passenger's power window motor.

6. Check for continuity between the front passenger's power window switch 10P connector terminals and front passenger's power window motor 2P connector terminals as shown. There should be continuity.









7. If there is no continuity, repair an open or high resistance in the wire(s). If the wire harness is OK, replace the front passenger's power window motor Service and Repair.