Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> Civic HF L4-1.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair






Knock Sensor Removal and Installation

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Tire and Wheel-Removal, Front Right





1. Remove the right front wheel.

3. Engine Undercover





1. Remove the engine undercover (A).

4. INTAKE MANIFOLD BRACKET





1. Remove the intake manifold bracket.

5. Knock Sensor





1. Disconnect the connector.

2. Remove the knock sensor (A).

Installation

1. Knock Sensor





1. Install the knock sensor (A).

NOTE: When installing the knock sensor, make sure the direction of the sensor connector (B) is facing up.

2. Connect the connector.

2. INTAKE MANIFOLD BRACKET





1. Install the intake manifold bracket.

3. Engine Undercover





1. Install the engine undercover (A).

4. Tire and Wheel-Installation, Front Right





1. Install the right front wheel.

NOTE: Before installing the wheel, clean the mating surfaces between the brake disc and the inside of the wheel.
pro multis · About Operation CHARM