Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> Civic HF L4-1.8L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Temperature Sensor/Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Temperature Sensor/Switch: Testing and Inspection






ATF Temperature Sensor Test

Removal

1. Vehicle Lift

1. Raise the vehicle on a lift, and make sure it is securely supported.

2. Engine Undercover





1. Remove the engine undercover (A).

Test

1. ATF Temperature Sensor - Test





1. Disconnect the connector (A).

2. Measure the resistance between shift solenoid wire harness 7P connector (B) terminals No. 5 and No. 6 for ATF temperature sensor.

Standard: 50 Ohms-25 kOhms
* If the resistance is out of the standard, replace the ATF temperature sensor and the solenoid wire harness.

NOTE: The ATF temperature sensor is not available separately from the shift solenoid wire harness.
* If the resistance is within the standard, the test is complete.

3. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

Installation

1. Engine Undercover





1. Install the engine undercover (A).
pro multis · About Operation CHARM