Harmonic Balancer - Crankshaft Pulley
Crankshaft Pulley
When a new crankshaft or a new pulley bolt is installed
Torque the bolt to 180 Nm (18.4 kgfm, 133 lbfft) with a torque wrench and a socket, then remove the bolt.
Torque the bolt to 50 Nm (5.1 kgfm, 37 lbfft) with a torque wrench and a socket.
Tighten the bolt an additional 82 °.
When the crankshaft or the pulley bolt is reused
Torque the bolt to 70 Nm (7.1 kgfm, 52 lbfft) with a torque wrench and a socket.
Tighten the bolt an additional 90 °.
