Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2012 >> Civic L4-1.8L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Service and Repair >> Removal and Replacement >> Battery Terminal Removal and Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Terminal Removal and Installation






Battery Terminal Removal and Installation

Removal

1. Battery Terminal - Disconnection





1. Make sure the ignition switch is in LOCK (0).

2. Disconnect and isolate the negative cable and battery sensor (A) from the battery.

NOTE: Always disconnect the negative cable from the battery first.

3. Disconnect the positive cable (B) from the battery positive terminal (C).

2. Battery Positive Terminal





1. Remove the battery positive terminal (A).

Installation

1. Battery Positive Terminal





1. Install the battery positive terminal (A).

2. Battery Terminal - Reconnection





NOTE: If the battery performs abnormally, test the battery.

1. Clean the battery terminals.

2. Connect the positive cable (A) to the battery positive terminal (B).

NOTE: Always reconnect the positive cable to the battery first.

3. Connect the negative cable and battery sensor (C) to the battery sensor (D).

4. Apply multipurpose grease to the terminal to prevent corrosion.
pro multis · About Operation CHARM