Manufacturer Code Charts: 2701

Navigation System DTC Troubleshooting: 2701

DTC 2701:

GPS Diag: Antenna

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when a problem is detected in the GPS antenna.
- Before you troubleshoot, make sure to follow the General Troubleshooting Information How to Troubleshoot the Navigation System.
- Make sure the vehicle is parked outside, away from buildings.
- Check for electronic aftermarket accessories (possibly hidden) mounted near the GPS antenna or the navigation unit.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode in the Select Diagnosis Items menu.

4. Select the GPS Ant. in the System Links.

Is Antenna OK indicated?

YES -

Intermittent failure, the system is OK at this time.

NO -

Go to step 5.

5. Turn the ignition switch to LOCK (0).

6. Check for poor connections or loose terminals at navigation unit connector E (2P) and the GPS antenna 2P connector.

Are there connections or terminals OK?

YES -

Replace the GPS antenna Service and Repair.

NO -

Repair poor connections or loose terminals, and recheck.