Dashboard Center Display Visor Removal / Installation (Without Navigation)

Dashboard Center Display Visor Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

Without Navigation

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:

- Center pocket Dashboard Center Pocket Removal / Installation (Without Navigation)
- Driver's inner dashboard trim Driver's Inner Dashboard Trim Removal / Installation
- Passenger's dashboard trim Passenger's Dashboard Trim Removal / Installation
- Audio unit Audio Unit Removal/Installation (Without Navigation)

2. Remove the center display visor (A).

1. Remove the screws.

2. Pull out the visor to detach the clips.





3. Install the visor in the reverse order of removal, and note these items:

- If the clips are damaged, replace them with new ones.
- Push the clips into place securely.