Excessive Shock Or Flares On 2-3 Upshift Or 3-2 Downshift

Excessive shock or flares on 2-3 upshift or 3-2 downshift

Worn or damaged engine or transmission mounts

Shift solenoid valve D defective

A/T clutch pressure control solenoid valve A defective

A/T clutch pressure control solenoid valve B defective

A/T clutch pressure control solenoid valve C defective

Transmission fluid pressure switch B (3rd clutch) defective

Shift fork shaft stuck

Servo control valve defective

CPC valve A defective

CPC valve B defective

Lock-up shift valve defective

Foreign material in separator plate orifice

Accumulator body defective

3rd accumulator defective

2nd check ball stuck

2nd clutch defective

3rd clutch defective

Clearance between clutch end-plate and top disc incorrect

Notes

Check the engine and transmission mounts.

Notes

Test the transmission fluid pressure switch B (3rd clutch) operation with the HDS.

Notes

Inspect the shift solenoid valve function with the HDS.

Notes

Test A/T clutch pressure control solenoid valve A or B with the HDS A/T Clutch Pressure Control Solenoid Valve A And B Test.

Notes

Test A/T clutch pressure control solenoid valve C with the HDS A/T Clutch Pressure Control Solenoid Valve C Test.

Notes

Check for a seized shift solenoid valve, and inspect the O-rings.

Notes

Check the 2nd and 3rd clutch pressures A/T Pressure Test.

Notes

Inspect the A/T clutch pressure control solenoid valve body gasket, the ATF feed pipes, and the O-rings for wear and damage.

Notes

Check for a missing shift fork bolt on the shift fork shaft.

Notes

Check the shift fork shaft detent for wear and damage.

Notes

Check for a stuck servo valve in the regulator valve body, replace the regulator valve body.

Notes

Check the servo control valve, CPC valve A, and the lock-up shift valve in the main valve body for free movement. If the valve does not move, replace the main valve body.

Notes

Check for a clogged orifice in the separator plate. If the orifice is clogged, remove it and clean the separator plate orifice.

Notes

Check CPC valve B in the secondary valve body for free movement. If the valve does not move, replace the secondary valve body.

Notes

Inspect the clearance between the clutch end-plate and the top disc of the 2nd and 3rd clutches. If the clearance is out of tolerance, replace the clutch assembly.

Notes

Replace the accumulator body.

Notes

Check for a stuck 2nd check ball in the secondary valve body.