Torque Converter Housing Park Lever Shaft Bearing Replacement

Torque Converter Housing Park Lever Shaft Bearing Replacement

Special Tools Required

- Bearing Remover Shaft Set, 12 mm 07936-166010A
- Slide Hammer 07936-371020A
- Driver Handle, 15 x 135L 07749-0010000
- Attachment, 22 x 24 mm 07746-001A800

1. Remove the park lever shaft bearing from the torque converter housing using the 12 mm bearing remover shaft set and the slide hammer.






2. Install the bearing until it bottoms out in the torque converter housing using the drive handle and the 22 x 24 mm attachment.