Torque & Sequence

Cylinder Head

Torque the cylinder head bolts in sequence to 29 N-m (3.0 kgf-m, 22 lbf-ft) with a beam-type torque wrench if possible. When using a preset-click-type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and retighten it from the first step.






Tighten all cylinder head bolts an additional 130 °.






Camshaft Bearing Cap









Tighten each bolt two turns at a time in sequence.

Specified Torque
8 mm Bolts: (1)-(10) 22 Nm (2.2 kg-m, 16 lb-ft)
6 mm Bolts: (11) 12 Nm (1.2 kg-m, 8.7 lb-ft)

Intake Manifold Specifications

Exhaust Manifold Specifications

Camshaft Gear/Sprocket Specifications