IPU Cover Removal/Installation

IPU Cover Removal/Installation

IMA components are located in this area. The IMA is a high-voltage system. You must be familiar with the IMA system before working on or around it. Make sure you have read the IMA service precautions before doing repairs or service High Voltage Safety.

1. Remove the cargo floor lid, the IPU duct cover, and the spare tire beam.

2. Turn the battery module switch OFF.

3. Remove the bolts (A, B) and the clips (C).





4. Remove the IPU cover (D).

5. Install the parts in the reverse order of removal.

NOTE: Before the battery module switch is turned ON, make sure all the high voltage circuits are connected properly. Then push the button (A), and turn the battery module switch ON.