B2002

DTC Troubleshooting: B2002

DTC B2002:

Left Power Slide Door Control Unit Internal Error (EEPROM Error)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Disconnect the battery terminal, and then reconnect Procedures.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Check for DTCs with the HDS.

Is DTC B2002 indicated?

YES -

Replace the left power sliding door control unit Service and Repair.

NO -

Intermittent failure, the left power sliding door control unit is OK at this time. Check for loose or poor connections at the left power sliding door control unit.