BSI Radar Unit Removal/Installation

BSI Radar Unit Removal/Installation

1. Remove the rear bumper Rear Bumper Removal/Installation.

2. Remove the BSI radar unit (A).

1. Disconnect the 6P connector (B), and detach the harness clips (C).

2. Remove the bolts.





3. Install the BSI radar unit (A).

1. Install the bolts.

2. Reconnect the 6P connector (B) and attach the harness clips (C).

NOTE: Clean the surface of the BSI radar unit, and make sure BSI radar unit installed to the BSI radar unit bracket (D) properly.





4. Do the BSI radar unit aiming inspection BSI Radar Unit Aiming Inspection.